Videotec's products are well known for their design, ease of installation and rugged construction. They are the results of skilled craftsmen combined with an engineering team with many years of experience in the field of video surveillance. And with all of groups expertise and dedication, they have been able to provide cost effective solutions into every Videotec installation.

You will require to have Adobe Acrobat Reader installed to view data sheets, please download it free from the Adobe Site.

Camera Housings

H E G - The largest housing of the range
Its internal dimensions make it suitable for 1/2" and 1/3" cameras equipped with fixed-focus lenses and zoom lenses. A wide range of accessories is available.
- Slide extractable body
- Indoor/outdoor installation, weather-proof standard IP66
- Snap-on sunshield
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max
- 3 cable glands for external connections
- Available version with 3+1 pole connectors and 1 BNC complete with prewired cable for video input (instead of regular cable glands)
- Special versions: "-016;-017" models with double filter blower for the air exchange and "-143" model with fan-assisted triple heater
- Recommended mounts: WBJ (wall mount), WCM5 (ceiling mount), WFWC (column mount)
- Available lenght: 365mm, 450mm
- Internal useful area: 88x134mm (HxB)
- Wide range of accessories available: normal or double heating (for temperature up -40ѓC, blower kit, camera power supply, wiper and washer

H E G Data Sheet (232KB-PDF file)

H E P - Professional weatherproof housing
Suitable for 1/2", 1/3" and 1/4" cameras equipped with fixed-focus lenses or compact zoom lenses.
- Slide extractable body
- Indoor/outdoor installation, weather-proof standard IP66
- Snap-on sunshield
- Available versions, for easy replacement on site: 30 poles connector or 3+1 pole connector with 1 BNC (complete with prewired cable for video input)
- Intelligent heating with variable power 20W or 40W max
- 2 cable glands for external connections
- Recommended mounts: WBJ (wall mount), WCM5 (ceiling mount), WFWC (column mount)
- Available lenght: 260mm, 320mm
- Internal useful area: 80x90mm (HxB)
- Wide range of accessories available: normal or double heating, blower kit, camera power supply

H E P Data Sheet (112KB-PDF file)

H O V - Weatherproof housing whose access is made easier thanks to the side opening, suitable for 1/2", 1/3" and 1/4" cameras. Equipped with concealed cable channel inside the bracket, it is available also the version with 3 cable glands for external connection cables.
- Side opening system to make the camera installation easier
- Indoor/outdoor installation, weather-proof standard IP66
- Snap-on sunshield
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max
- 3 optional cable glands for external connections
- Recommended mounts with internal cable channel: WBOV (wall mount), WCM4 (ceiling mount)
- Recommended mounts with external cable: WBJ (wall mount), WCM5 (ceiling mount), WFWC (column mount)
- Available lenght: 270mm
- Internal useful area: 100x70mm (HxB)
- Available accessories: heater kit, blower kit, camera power supply, integrated wiper,alarm tamper switch

H O V Data Sheet (192KB-PDF file)

H E B - Aesthetically pleasing design, large weatherproof housing, suitable for 1/2", 1/3" and 1/4" cameras equipped with fixed-focus lenses or zoom lenses. The particular opening system makes installation easier. It has two mount options at the same time: regular (with WBM bracket) or feed-through (with WBOV bracket).
- Slide extractable body with hinged system
- Indoor/outdoor installation, weather-proof standard IP66 with cable-glands
- Snap-on sunshield
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max
- 3 cable glands for external connections
- Recommended mounts: WBM (wall mount), WCM5 (ceiling mount), WFWC (column mount) for external cables. WBOV (wall mount), WCM4 (ceiling mount) for feed-through
- Available lenght: 260mm, 320mm
- Internal useful area: 85x90mm (HxB)
- Available accessories: heater kit, blower kit, camera power supply, fan-assisted heater

H E B Data Sheet (92KB-PDF file)

H E A - Medium weatherproof housing for general use, suitable for 1/2", 1/3" and 1/4" cameras equipped with fixed-focus lenses and compact zoom lenses. The particular opening system makes installation easier. It can be perfectly combined with outdoor pan & tilt motors.
- Slide extractable body with hinged system
- Indoor/outdoor installation, weather-proof standard IP66
- Snap-on sunshield
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max
- 2 cable glands for external connections
- Recommended mounts: WBM (wall mount), WCM5 (ceiling mount), WFWC (column mount)
- Available lenght: 260mm, 300mm
- Internal useful area: 70x84mm (HxB)
- Available accessories: heater kit, blower kit, camera power supply, fan-assisted heater

H E A Data Sheet (104KB-PDF file)

H E M - Stylish, medium weatherproof housing, for general use, for 1/3" and 1/4" cameras equipped with fixed-focus lenses. Its internal dimensions make it suitable for most of the cameras on the market. The particular opening system makes installation easier. It can be perfectly combined with outdoor pan & tilt motors.
- Slide extractable body with hinged system
- Indoor/outdoor installation, weather-proof standard IP66
- Snap-on sunshield
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max
- 2 cable glands for external connections
- Recommended mounts: WBM (wall mount), WCM5 (ceiling mount), WFWC (column mount)
- Available lenght: 220mm, 260mm, 300mm
- Internal useful area: 70x65mm (HxB)
- Available accessories: heater kit, blower kit, camera power supply, fan assisted heater

H E M Data Sheet (84KB-PDF file)

H E T - Stylish, mini weatherproof housing, suitable for 1/3" and 1/4" cameras equipped with fixed-focus lenses or for board cameras. Wide range of lengths available. Combined with WBCA bracket, it becomes a solution for all indoor/outdoor installations requiring small housings. The particular opening system makes installation easier.
- Slide extractable body with hinged system
- Indoor/outdoor installation, weather-proof standard IP66
- Snap-on sunshield
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max (100mm version excluded)
- 2 cable glands for external connections
- Recommended mounts: WBCA(wall/ceiling mount, for 100mm and 160mm versions), WBM (wall mount), WCM5 (ceiling mount), WFWC (column mount)
- Available lenght: 100mm, 160mm, 220mm, 300mm
- Internal useful area: 55x62mm (HxB)
- Accessories available: Heater kit (100mm version excluded, weatherproof junction box with camera power supply

H E T Data Sheet (88KB-PDF file)

VERSO
- Completely built in polycarbonate
- IP66 (with cable glands)
- Side opening
- Installation with 3 standard cable glands and bracket or with cable management bracket
- Available accessories: sunshield, fan-assisted heater, camera power supply, blower and air filter and alarm tamper switch

VERSO Data Sheet (172KB-PDF file)

H E K - New aluminium-polimeric concept housing, for indoor/outdoor installations. Its internal dimensions make it suitable for CCD cameras equipped with fixed-focus lenses or zoom lenses. It has two mount options at the same time: regular (with WBM bracket) or feed-through (with WBOV bracket). The innovative hinged opening system allows an easy access to the interior.
- Indoor/outdoor installation, weather-proof standard IP66
- Dustproof version available
- Intelligent heating with variable power 20W or 40W max
- 2xPG9, 1xPG11 removable cable glands for external connections
- Recommended mounts: WBM (wall mount), WCM5 (ceiling mount), WFWC (column mount) for external cables. WBOV (wall mount), WCM4 (ceiling mount) for feed-through
- Available lenght: 260mm, 300mm
- Internal useful area: 62x82mm (HxB)
- Available accessories: heater kit, blower kit, camera power supply, fan-assisted heater

H E K Data Sheet (108KB-PDF file)

Brackets for Housing and Cameras

Easy to install, sturdy and reliable, Videotec brackets meet different requirements, both for ceiling and wall installations. Epoxy powder painted, RAL9200 colour, with stainless steel screws. Each bracket has been designed to be combined with various housings, in order to make its choise and handling easier.

Brackets for Housing and Cameras Data Sheet (264KB-PDF file)

P&T Motors, Controls and Brackets

PTH900 - Outdoor pan & tilt motor for loads up to 30 Kg (66 lb), made of die-cast aluminium and painted with epoxy-polyester powder. The mechanical construction is very sturdy and reliable. The integrated Autopan function with delayed inversion allows the automatic scanning between the left and right limit switch.
- Outdoor installation, IP66
- 24VAC and 230VAV, 50/60Hz versions
- Internally adjustable horizontal and vertical limit switches
- Horiz. speed 6ѓ/s, vertical speed 3ѓ/s
- Optional preset
- Optional heater kit
- Suitable for HEG, HEP, HEB, HEM, HEA, NXJ housings (adapting plate is necessary)
- Recommended brackets: PTBC (wall mount), PTPC (pole mount), PTDC (ceiling mount), WFWBT (column mount)
- Stainless steel screws

PTH900 Data Sheet (116KB-PDF file)

PTH300 - Outdoor pan & tilt motor for loads up to 12 Kg (26 lb), made of die-cast aluminium and painted with epoxy-polyester powder. The mechanical construction is sturdy and reliable. The integrated Autopan function allows the automatic scanning between the left and right limit switch. It is available also with potentiometers which allows the preset function.
- Outdoor installation, IP66
- 24VAC and 230VAV, 50/60Hz versions
- Internally adjustable horizontal and vertical limit switches
- Horiz. speed 6ѓ/s, vertical speed 3ѓ/s
- Optional preset
- Optional heater kit
- Suitable for HEP, HEB, HEM, HEA, HEK housings
- Recommended brackets: PTAC (wall mount), PTPC (pole mount), PTDC (ceiling mount), WFWBT (column mount)
- Stainless steel screws

PTH300 Data Sheet (132KB-PDF file)

PTH355P - Outdoor variable speed pan & tilt motor for loads up to 12 Kg (26 lb), made of die-cast aluminium and painted with epoxypolyester powder. Controlled by the DTRXDC telemetry receiver, it allows the storage of 14 preset positions as a standard feature.
- Outdoor installation, IP66
- DC motors: (0-24VDC)
- Autopan function (8 different speeds)
- Internally adjustable horizontally and vertically limit switches
- Horizontal speed from 0 to 30ѓ/s
- Vertical speed from 0 to 18ѓ/s
- Standard preset option
- Suitable for HEP, HEB, HEM, HEA, HEK housings
- Recommended brackets: PTAC (wall mount), PTPC (pole mount), PTDC (ceiling mount), WFWBT (column mount)
- Stainless steel screws

PTH355P Data Sheet (128KB-PDF file)

IPHS IPTS & I P T - Wall indoor pan & tilt motor for loads up to 5 Kg (11 lb). It consists of a sturdy die-cast aluminium structure, protected by a plastic shell, which gives a particularly modern and nice aspect, allowing the pan & tilt to be used even in public places, such as banks, offices, supermarkets. The integrated Autopan function allows the automatic scanning between the left and right limit switch. The practical fixing system ensures a rapid installation and an easy access for maintenance.

IPHS IPTS & I P T Data Sheet (96KB-PDF file)

P&T BRACKETS
- For indoor and outdoor installation
- Made of aluminim, painted with epoxy powder

P&T BRACKETS Data Sheet (164KB-PDF file)

CBZ - Desktop controller for pan & tilt and zoom lens, made of alluminium enclosure and polycarbonate membrane keyboard. It can be directly connected to the pan & tilt motor and can interface with most of the motor-driven zoom lenses in the market, either with common ground or polarity inversion controls. The low cost of this controller and its easiness of use make it an interesting object for small CCTV control systems. The pan & tilt power supply is directly supplied by the controller.
- Suitable for common ground or polarity inversion motor-driven zoom lenses, 6/12VDC
- 24VAC and 230VAC, 50/60 Hz versions
- Control of Autopan function
- 24VAC and 230VAC, 50/60Hz versions

CBZ Data Sheet (88KB-PDF file)

Vandal Resistant Housings

AVTPSC - Compact vandal resistant ceiling housing completely made of 1,5mm steel sheet. It is particularly suitable for surveillance applications in places exposed to vandalism, such as underground parkings, subway stations, police stations, prisons, etc.
- Compass opening by means of a lock
- Indoor installation
- Vandal resistant glass, 4mm, in PMMA
- Possibility of external connections by means of 2 M20 cable glands or directly from the ceiling
- Adjustable camera bracket included
- Without external screws
- Accessories available: thermostated heater and camera power supply

AVTPSC Data Sheet (112KB-PDF file)

AVTPSKB - Vandal resistant ceiling housing completely made of 2,5mm steel sheet. It is particularly suitable for surveillance applications in places exposed to vandalism, such as underground parkings, subway stations, police stations, prisons, etc.
- Compass opening by means of a lock
- Indoor installation
- Vandal resistant glass, 4mm, in polycarbonate
- Possibility of external connections by means of 3 M20 cable glands or directly from the ceiling
- Adjustable camera bracket included
- Without external screws
- Accessories available: thermostated heater, camera power supply and alarm tamper switch

AVTPSKB Data Sheet (128KB-PDF file)

AVTPSA & AVTPSAM - Vandal proof corner housing completely made of 3mm steel sheet . It is particularly suitable for surveillance applications in places highly exposed to vandalism. Its constructive features make it suitable also for elevators.

AVTPSA & AVTPSAM Data Sheet (84KB-PDF file)

AVBPH - Large armoured weatherproof housing.
Produced in extremely thick aluminium extrusion, with front and rear bottom made of 30 mm (1.1 in) die-cast aluminium. The housing features 3 mm (0.1 in) steel armour side plating and 18 mm (0.7 in) vandal-proof glass on vandal resistant metallic structure. Using the specially designed support plate, the cables can arrive directly into the external vandal resistant junction box.
- Stainless steel sunshield
- Standard IP54
- Recommended bracket: AVBPWBB, with internal cable channell
- Standard accessories: sunshield and heater
- Optional: blower and camera power supply

AVBPH Data Sheet (104KB-PDF file)

Integrated Positioning Units

ULISSE - The positioning unit integrates a high performance P&T head with a camera housing and a telemetry receiver
- Continuos horizontal rotation, max 100ѓ/s speed
- 0,05° tracking accuracy
- Patrol, pattern and dynamic video masking of different areas
- Multi-protocol communications through RS232, coaxial or RS485/RS422 interface
- Weatherproof standard IP66
- Load rating 20 Kg
- Wiper and IR illuminators fitting

ULISSE Data Sheet (380KB-PDF file)

MISTRAL integrates a robust variable speed pan-tilt mechanism with a high performance DSP colour camera.
- Small aestetically appealing design
- Wide dynamic range camera
- High resolution 460lines colour camera with ALC, AGC, AWB and automatic BLC
- Wide range of controlled keyboards
- 32 non-volatile presets with 0,1ѓ target accuracy
- Multiple RS485 protocols
- Inbuilt active UTP transmission
- 200ѓ/sec. (max.) preset acquisition
- Telemetry control over twisted pair
- High design MTBF
- Variety of communication protocols
- 6mm or 8mm lens available

MISTRAL Data Sheet (192KB-PDF file)

Eex Proof Housings and P&T motors

EXHC & EXHD - Explosion-proof housing constructed in solid, anticorodal aluminium alloy, 10 mm (10,4in) thick and powder painted RAL 7032. The cylindrical body of the EXHC housing (diameter 210mm length 400mm) is sealed at opposite sides by two 12mm thick flanges, while 2 3/4" GAS cable glands allow the wiring with the exterior. The housing is equipped with heater and optional sunshield.

EXHC & EXHD Data Sheet (212KB-PDF file)

EXPT & EXPTD - P&T motor with integrated camera housing equipped with a glass protection device installed on the front of the housing. The EXPTD system includes a housing with the same specifications as the EXHD and an integrated P&T motor. The exceptional feature of the EXPTD is the absence of external wiring rotating: for the control of the P&T motor, the camera, the focusing and glass protection device. This solution simplifies the installation and the maintenance of the P&T. A single multi-core cable, ready wired up, included with the unit, comes out of the base of the P&T through a cable gland.

EXPT & EXPTD Data Sheet (192KB-PDF file)

Telemetry receiver/driver for hazardous environment.
The EXDTRX3 features 17 functions with included preset and alarm card. It allows the complete control of EXPTB000, EXPTC000 and EXPTD001. Available in 230VAC, EXDTRX3, and in 24VAC, EXDTRX324.
- IP66 enclosure
- N.4 cable glands
- Maintenance of configuration in case of power loss
- Up to 14 presets
- 4 alarm inputs, (prepositioning in case of alarm
- Preset autotest functions
- RS232, Current Loop, RS485 or over the Coax (with optional card DTCOAX) selectable communication
- Integrated protocol Pelco D
- Certification II 2 GD EEX d IIC T6 according to ATEX standards

EXDTRX3 Data Sheet (188KB-PDF file)

Dome Enclosures

DSBH120 - Half-sphere dome for discreet surveillance, for dropped (false) ceiling mounting. Particularly suitable for supermarkets, banks, shopping centers...
It ensures an effective camouflage of the camera without compromising the quality of the video picture.
The installation and the maintenace are quick and easy.
- Diameter: 120mm
- Weight: 0,6 kg

DSBH120 Data Sheet (76KB-PDF file)

DBH24K - Spherical housing with small diameter constructed in plastic with the lower semi-sphere in plexyglass. Its special design allows it to mimic normal illumination systems. Easy to install, this model can house cameras of 1/2", 1/3" and 1/4", fitted with fixed focus or small zoom, most of high speed domes and PTZ network cameras available on the market.
- Black housing, RAL9002 sunshield
- Protection level IP65
- Wall, ceiling or parapet application with cable management bracket
- Recommended support: DBH04 (wall), DBH03 (ceiling), DBH05 (parapet), DPTCH (pole collar), DCWGH (corner adapter)
- Accessories: standard sunshield and selectable lower glass, transparent or smoked.
- Optional accessories: fan assisted thermostat heater and camera power supply

DBH24K Data Sheet (124KB-PDF file)

DSBH45 - 450mm ceiling half-sphere dome. The dome can be directly fixed to the ceiling or false ceiling. Its dimensions make it suitable for most of the cameras and zoom lenses in the market. It is also possible to mount IPTS, IPHS indoor P&T motors. An adjustable camera mounting bracket is included.
- Indoor installation
- Black anodized aluminium base

DBH45 - 450mm full sphere dome suitable for ceiling and wall applications. Its dimensions make it suitable for most of the cameras and zoom lenses in the market. It is also possible to mount IPTS, IPHS indoor P&T motors. An adjustable camera mounting bracket is included.
- Indoor/outdoor installation
- Black anodized aluminium base
- Accessories available: heater kit, camera power supply
- Recommended brackets: DBH01 (wall bracket)

DSBH45 & DBH45 Data Sheet (96KB-PDF file)

DPTCH: pole mount adaptor made of aluminium, painted with black epoxypolyester powder. Pole diameters 80ч150mm. Suitable for DBH01 and DBH04.
DCWGH: corner mount adaptor made of aluminium, painted with black epoxypolyester powder. Suitable for DBH01 and DBH04.

DPTCH & DCWGH Data Sheet (196KB-PDF file)

Stainless steel Housings and P&T motor

NXL - Special weatherproof housing for big zoom lenses, entirely made of AISI 316 stainless steel. It has been designed with the most important lenses manufacturers. Particularly designed for marine or industrial enviroments, chemical installations and in general for all those environments where the external agents are highly corrosive. The cylindrical body is enclosed by two circular flanges. Four PG13,5 cable glands for the external connections.
- Four PG13,5 nickel-plated brass cable glands for external connections
- Sealing O-ring gaskets
- IP67
- Recommended bracket: NXWBL (wall mount)
- Accessories available: heater kit, camera power supply, air barrier + filtering group, wiper and washer

NXL Data Sheet (156KB-PDF file)

NXM - Special weatherproof housing, entirely made of AISI 316 stainless steel. It is particularly designed for marine or industrial enviroments, chemical installations and in general for all those envi-ronments where the external agent are highly corrosive. The cylindrical body is enclosed by two 12mm thick circular flanges.
- Two PG13,5 nickel-plated brass cable glands for external connections
- Sealing O-ring gaskets
- IP68, submersible up to -50m (130ft) 5 BAR max pressure
- Recommended bracket: NXWBS (wall mount)
- Accessories available: sunshield, heater kit, camera power supply, air barrier + filtering group, wiper and washer

NXM Data Sheet (204KB-PDF file)

NXW - Special liquid-cooled housing, entirely made of AISI 316 stainless steel. Designed for use in conditions where extremely high temperatures are reached (steelworks, foundry). It has a cylindrical body construction with double chamber inside where a cooling liquid (or gas) connected to an external circuit can circulate. The housing is closed by means of two 12mm thick flanges.
- Weatherproof standard IP67
- Two nickel-plated brass 13,5 cable glands for external connections
- ONXAB air barrier included
- Sealing O-ring gaskets
- Application example: environmental temperature 100ѓC (752ѓF), 6l/min (1,6gal/min) incoming water at 20ѓC (68ѓF) temp., internal housing temperature 45ѓC (113ѓF)
- Recommended bracket: NXWBS (wall mount)
- Accessories available: camera power supply, filter group, toughened glass, VICOR glass and IR proof glass.

NXW Data Sheet (124KB-PDF file)

NXJ - Large weatherproof housing suitable for large cameras and various zoom lenses, entirely made of AISI 304 stainless sheet steel and painted with epoxypolyester powder.
- Hinged opening system
- IP54
- 2 cable glads for external connections
- Recommended bracket NXWBS (wall mount)
- Available lenght: 500mm
- Accessories available: standard sunshield and thermostat heater; optional blower, camera power supply, wiper and washer

NXJ Data Sheet (96KB-PDF file)

NXPTH - Aisi 316 stainless steel P&T motor for loads up to 40 balanced kgs (88lb), designed for movement on horizontal and vertical planes. The NXPTH resists to the most severe environment, developed for the offshore market, for every type of sea-going vessel and for industrial applications. The accurate mechanical construction and the reliable motors reduce the need of maintenance. The P&T is equipped with potentiometers which allow the preset function.
- Standard IP67
- 24VAC or 230VAC, 50/60HZ versions
- Horizontal speed 5ѓ/s, vertical speed 3ѓ/s
- Suitable for NXM housing
- Recommended bracket: NXWBPT (wall mount)

NXPTH Data Sheet (124KB-PDF file)

Brackets & Accessories

Brackets & Accessories Data Sheet (192KB-PDF file)

Monitor Mounts

Monitor Mounts - Videotec mounts have been designed to support firmly the weight of monitors, conferring at the same time a nice and modern aspect to the whole. Entirely made of aluminium painted with epoxypolyester powder, they offer a wide range of adjustment so that they can be adapted to monitors with the most various shape. They consist of modular elements, which are the same for all mounts, such as for example the mounting accessories. The mounting system with tie-rods and corner adaptors covered with rubber prevents the monitor from being damaged.
- New modern design
- Aluminium construction painted with epoxypolyester powder
- For 9" ч 28" monitors
- Modular construction

Monitor Mounts Data Sheet (156KB-PDF file)