You will require to have Adobe Acrobat Reader installed to view data sheets, please download it free from the Adobe Site.

High Powered Spot LEDs
Moritex's MG Wave high-powered coaxial spot LED lights (MCEP Series) are designed to be compatible with our machine micro lenses. These small, lightweight lights utilize proprietary collector optics and light guides for maximum illuminance. Stable illumination can be achieved when used with a dedicated constant-current power source.

** New MLEP Power Sources **
Digital MLEP Power sources are now available. These power sources have two intensity adjustment controls for "fine" and "coarse" adjustment. They can also be externally controlled with an 8-bit digital signal.

Power Sources
The high-powered spot LEDs have their own unique constant current power sources, the MLEP Series. The MLEP-A03511LR is a single channel dedicated power source and the MLEP-A03513LR is a three channel source. Both have a maximum channel output of 350mA for each channel and allow for intensity control. The three channel power source not only supports three channel independent intensity control, but three channel coordinated intesnty control as well (in the combination mode).

Options
The MCEP-AD Series offers two optical fiber guide connection options that can be utilized with the high powered spot LEDs. The two options are the single lamp type guide (MCEP-ADLG) and the three lamp type guide (MCEP-AD3LGB). These options take advantage of Moritex's optical fiber technology to effectively direct the light to the light guide without losing intensity and, thereby, achieve higher illuminance. The three lamp type fiber connection can be used as a "light mixer" when different color high powered spot LEDs are connected. These fiber connectors are multi-adapter units compatible wiht all models of our standard light guides.

High Powered Spot LEDs Data Sheet (1.2MB-PDF file)

Direct Ring Type LEDs
High-illuminance LEDs are deployed at high density to produce 360ѓ shadow-free illumination. This standard range type of LED lighting can be used for a wide range of applications. The different sizes give you the ability to select the model that best matches our lenses. All the direct ring lights are available at red, green, blue, and white wavelengths.

Customization is available.

Direct Ring Type LEDs Data Sheet (1.5MB-PDF file)

Low Angle Ring Type LEDs
The Low Angle Ring Type LEDs provide 360° illumination for reflective objects and the low angle design prevents reflections. These LEDs are ideal for slightly uneven surfaces and scratches. Various lighting angles are available at red, green, blue, and white wavelengths.

Major applications for these low-angle ring light LEDs include:
- Inspection of BGA solder ball position, shape, and area
- Reading laser engraving
- Inspection of wafers or glass substrates for scratches and dirt
- Edge extraction inspection and more

Low Angle Ring Type LEDs Data Sheet (1.4MB-PDF file)

Shadowless Type LEDs
Moritex offers three types of MG Wave shadowless LEDs: ring type, low angle ring type, and low angle square type. The shadowless LEDs (also known as "dark field" LEDs) provide soft, even, and diffused lighting that is necessary when illuminating shiny objects and preventing the halo effect. The shadowless low angle square type LEDs are perfect for inspecting square shaped objects. All of the shadowless LEDs come in red, green, blue, and white wavelengths.
Common applications these LEDs are used for include:
- IC impress inspection & substrate part inspection
- Inspection of the side and internal surfaces of caps for dirt
- Visual inspection of wafers
- Solder inspection & connector pitch inspection
- Inspecion of BGAs and QFPs

Shadowless Type LEDs Data Sheet (1.4MB-PDF file)

Edge-Type Backlight LEDs
Moritex's MG Wave Edge-Type Backlight LEDs have a thin, compact design that is perfect when working with limited space. Even, uniform lighting and high intensity are achieved with the use of Moritex's proprietary light-guiding diffusion plate. A variety of shapes and sizes are available in red, green, blue, and white wavelengths.
These LEDs can be used for a range of applications including:
- Lead frame inspection
- Visual inspection of electronic parts
- Bend lead inspection for GFPs, QSPs, and SOPs
- Inspection for dirt on clear film
- A variety of silhouette observations

Edge-Type Backlight LEDs Data Sheet (914KB-PDF file)

Array-Type Backlight LEDs
Moritex offers two different types of array type backlight LEDs: the MDBL and MDBC Series. The MDBL Series has been designed to provide a higher luminance than the edge type LEDs with lamp type LCDs mounted immediately beneath the lighting surface. The MDBC Series utilize a thin design of the chip mounted type that is optimal for space reduction. Applications include:
- Lead frame inspection
- Visual inspection of electronic parts
- Bend lead inspection for GFPs, QSPs, and SOPs
- Inspection of clear film for dirt and other particles
- Various silhouette observations.

MDBC Series: Direct Backlight Chip-Mount Type LEDs Data Sheet (1.4MB-PDF file)

MDBL Series: Direct Backlight Lamp Type LEDs Data Sheet (1.4MB-PDF file)

Coaxial/Simulated Coaxial LEDs
For our customers' coaxial lighting needs, Moritex offers coaxial and simulated coaxial episcopic LEDs. The compact coaxial LEDs of the MCEL Series were designed for the MML series telecentric lenses and are ideal for objects with highly reflective surfaces. The MSCL Series of pseudo-coaxial type LEDs produce simulated even coaxial lighting for our telecentric MML lenses and other lenses without coaxial episcopic illumination.
Major applications include:
- Alignment and surface inspection of highly reflective surfaces, such as wafers, metal surfaces, film, liquid crystals, and glass
- Pattern inspection on printed boards.

Coaxial/Simulated Coaxial LEDs Data Sheet will be available soon. For more information about this product, please contact one of our sales representatives.

Bar, Linear, & Oblique Type LEDs
Moritex strives to meet the needs of customers whose applications call for LED line lighting of all kinds. For that reason, Moritex offers bar light and linear light type LEDs, as well as square bar oblique LEDs.

MLNLX Series: Long Line Light LEDs Data Sheet (1.3MB-PDF file)

MLNL Series: Line Light LEDs Data Sheet (1.3MB-PDF file)

MDQL Series: Square Type Oblique LEDs Data Sheet (1.1MB-PDF file)

MBRL Series: Bar Light LEDs Data Sheet (1.1MB-PDF file)

MG Wave Power Sources
The MLEK Series contains a full line of constant current power sources for Moritex's MG Wave LED lighting solutions, excluding the MCEP Series. Since there are a wide range of lights suitable for different applications, Moritex offers different models of power sources that are designed to meet the current requirements of the lights available. Because heat generation has been reduced, they can be used in a way that makes the most of the unique features of the different LED lights. They are also equipped with a variety of functions, including output control. There are three different sub-series of power sources that differ by current output and they are: the A080 Series, A230 Series, and the B400/B660 Series.

MG Wave Power Sources Data Sheet (1.6MB-PDF file)

MG Wave LED Options
Below is a list of the optional accessories that are available to support the use of our MG Wave LED lighthing systems and improve their functionality.

MG Wave LED Options Data Sheet (1.6MB-PDF file)

IR Light LEDs
Moritex now offers IR LEDs in four different configurations: array type back light, bar type, ring, and shadowless ring. Please see their details below.

IR Light LEDs Data Sheet (588KB-PDF file)

Parallel Lighting LEDs
Moritex has now developed Parallel Lighting LEDs for profile inspection. Moritex's MCBP Series Parallel Lighting LEDs enable the profiles of objects to be captured with high precision. Such profiling applications were difficult with conventional lights because the light was projected from the rear. With these LEDs, the light is projected horizontally along the package and then reflected down vertically. The MCBP series LEDs are ideal for measuring the dimensions of raised objects as well as the recognition of alignment marks on glass substrates.

Parallel Lighting LEDs Data Sheet (916KB-PDF file)

UV Light LEDs
Due to the need for efficient lighting systems outside of the visible range, Moritex has introduced a line of 365nm wavelength UV LEDs. At this time, three different LEDs are available.

UV Light LEDs Data Sheet (1.4MB-PDF file)

Dome Type LEDs
Moritex has developed a line of dome light type LEDs. The MDML Series LEDs have been designed to evenly illuminate object surfaces by reflecting on the dome inbound light fibers arranged at 360ѓ angles along the lower section of the dome. These dome LEDs are useful in the inspection of curved metal surfaces as well as printed surfaces (i.e. the bottom of aluminum cans). Two different size of dome LEDs are available, each in four different wavelengths: red, green, blue, and white.

Dome Type LEDs Data Sheet (1.8MB-PDF file)

Halogen Lighting

50W Halogen Light Sources
Moritex manufactures two 50W Halogen light sources that can be used for your specific applications. The MHF-H50LR is a compact low priced light source and the MHF-C50LR is a compact, more advanced type light source.

50W Halogen Light Sources Data Sheet (1.4MB-PDF file)

150W Halogen Light Sources
Moritex offers two 150W Halogen light sources that can used for a variety of high intensity lighting applications. The two sources that we offer, the MHF-G150LR and MHF-G150LRC, are both high intensity, advanced type light sources. The differences between the two are that the MHF-G150LR has a higher average luminosity, but also has a shorter lamp life.

150W Halogen Light Sources Data Sheet (1MB-PDF file)

Feedback Halogen Light Sources
Moritex offers six different models of feedback halogen type light sources and a special light guide that you can choose from to best fit your applications. The feedback Halogen light sources can always illuminate the preset quantity of light by monitoring the light from the Halogen lamp and automatically correcting subtle differences in quantity as time passes.

Feedback Halogen Light Sources Data Sheet (1MB-PDF file)

100W Halogen Light Sources
Moritex manufactures three 100W Halogen light sources that can be matched to your specific applications. The MHF-D100LR is a highly reliable and is our best selling light source. TheMHF-M1001 & MHF-M1002 light sources are thin and available at a low price.

100W Halogen Light Sources Data Sheet (1.4MB-PDF file)

UV Lighting

UV Light Sources
Moritex has two UV light sources that can be used for a variety of applications including spot-area illumination and curing.

UV Light Sources Data Sheet (772KB-PDF file)

UV Light Guides
In addition to our standard light guides used for Halogen and Metal Halide lighting, Moritex offers light guides for use with UV light. These light guides are available in 1, 2, 3, or 4 lines, ring type, and line type configurations. Depending on the transmission you need, there are quartz and glass fiber guides available in 3mm and 4mm bundle diameters and in different lenghts.

UV Light Guides Data Sheet (916KB-PDF file)

IR Lighting & Vision

IR Light Source & Lamps
The MHF-D100LR-IR light source is based on our standard 100W Halogen light source. This light source is effective not only for Si, but also for compound semiconductors. It can be used for many applications such as wafer on wafer alignment, MEMs inspection, and void inspection. LM-100-IR 100W spare lamps for the MHF-D100LR-IR are also available.

IR Light Source & Lamps Data Sheet (932KB-PDF file)

IR Light Guide
The MSG4-1100S-HR is a special heat resistant fiber light guide that has been made for use with our IR light source.

IR Light Guide Data Sheet (440KB-PDF file)

IR MMLs
Moritex currently offers three different fixed magnification MML lenses for IR applications:
- MML4-80D-IR
- MML6-80D-IR
- MML8-80D-IR
They are 4X, 6X, and 8X magnification, respectively, and all have a working distance of 80mm.

IR MMLs Data Sheet (440KB-PDF file)

Metal Halide Light Sources

250W Metal Halide Light Source
Moritex offers the MME-250 high power (250W) Metal Halide light source for image processing and inspection. Our Metal Halide light sources don't flicker because a direct current lighting method is used.

250W Metal Halide Light Source Data Sheet (920KB-PDF file)

Strobe Light Source

MFS-15F1
The MFS-15F1 strobe light source is compact and low price because of the integrated power source and lamp. Its features are:
- Wide brightness adjustment range
- Stable brightness
- Long lasting lamp that can easily be changed
- A miss emission detecting circuit is used to increase the system's reliability
- Its optical fiber allows for more flexible and free strobe lighting.

MFS-15F1 Data Sheet will be available soon. For more information about this product, please contact one of our sales representatives.

Fiber Light Guides

Ring Light Guides
Moritex offers ring type light guides of both glass and plastic fiber types in a range of lengths and diameters. Customers can also request SUS flexible tube material as well as SUS flexible plus PVC tube material and special heat resistant ends. The 360ѓ lighting creates even light with no shadows that is perfect for applications using CCD cameras and microscopes.

Ring Light Guides Data Sheet (488KB-PDF file)

Straight Light Guides
Moritex offers many variations of the regular straight type light guides. You can select a product to fit your application with the follow options:
- Glass or Plastic Fiber Type
- Bundle diameter of 3mm, 4mm, 6mm, 8mm, or 10mm
- Interlocking, SUS flexible, and SUS flexible plus PVC tube materials
- Special functions such as 300ѓC heat resistant ends, small diameter, random sequence, and L-shape types.
These light guides can be powered by Moritex's light sources and utilized for the episcopic coaxial illumniation feature common on our Machine Micro Lenses.

Straight Light Guides Data Sheet (1016KB-PDF file)

Bifurcated Light Guides
Moritex's Bifurcated Light Guides are used for lighting from two directions when using a microscope and/or CCD camera for applications like pattern recognition. You can select a product to fit your purpose with the follow options:
- Glass or Plastic fiber type
- Special coatings can be selected
- Small diameter type with smaller minimum bend values are also available
- Interlocking, SUS flexible, SUS flexible plus PVC tube, and SUS flexible plus interlock type tube materials
- Special functions such as 300°C heat resistant ends, small diameter, random sequence, and L-shape types.
These light guides can be powered by Moritex's light sources and utilized for the episcopic coaxial illumniation feature common on our Machine Micro Lenses. The interlock and SUS flexible type tube materials, mentioned above, allow for fixed placement and free movement, respectively, in applications.

Bifurcated Light Guides Data Sheet (1016KB-PDF file)

Multifurcated Light Guides
Moritex's Multifurcated Light Guides have three or four terminating fiber bundles and are good when illuminating an object from many different angles. This would be valuable during pin inspection of a flat package. Options include:
- Number of branches (3 or 4)
- Bundle diameter at output side (3mm or 4mm)
- Various lengths
- Small diameter type
These light guides can be powered by Moritex's light sources and utilized for the episcopic coaxial illumniation of 3 or 4 lenses.

Multifurcated Light Guides Data Sheet (252KB-PDF file)

Plate Lighting Light Guide
The plate lighting light guide comes in a variety of sizes of illuminating area with 1500mm length cable. It does not require as much space as other light guides because it is thin and compact. Moritex's unique reflection light inducer allows for even, bright illumination. It can be used for multi-observation inspections where transmitting illumination and uniform illumination are needed.

Plate Lighting Light Guide Data Sheet (252KB-PDF file)

Diffuse Lighting Series
Moritex offers three different light guide solutions in our Diffuse Lighting Series. The three different types are:
Dome Type Light Guide
An indirect light in which illumination is reflected off the interior of the dome, resulting in 360ѓ of even and diffuse illumination. This type of light guide is suitable for applications with high reflection and halo problems

Diffuse Lighting Adaptor
This adaptor is for use with standard ring light guides. It greatly reduces reflection and halo effects by illuminating from the inside surface of the dome.

Reflection Type Diffuse Lighting Adaptor
Using this adaptor, light output from the ring is directed by a reflection ring to the object. The result is a diffuse and uniform light suitable for laser mark recognition applications

Diffuse Lighting Series Data Sheet (1.1MB-PDF file)

Line Light Guides
Moritex line (slit type) light guides can be used when line illumination or one-dimensional linear CCD camera lighting are necessary. The light guide cable length is 1500mm. The options include:
- Glass or plastic fiber type
- A line length of 50mm or 180mm
- Single or bifurcated configuration.

Line Light Guides Data Sheet (312KB-PDF file)

Long Width Slit Type Light Guides
Moritex offers Long Width Slit Type Light Guides to be used in LCD and PDP glass substrate inspection, sheet type product inspection, and othe rline CCD camera applications. The 180mm wide slit type light guide can be connected to achieve jointless, even, and bright slit light in lengths of 180mm multiples. Long width light guides from 360mm to 1,440mm can be manufactured. Both glass and plastic fiber guides are available.

Long Width Slit Type Light Guides Data Sheet (300KB-PDF file)

Light Guide Condensing Lenses
Moritex has developed unique, advanced condenser lenses. The cost performance of our lenses is excellent because Moritex carries out the entire production process from design to manufacturing.

Moritex offers condenser lenses for straight, bifurcated, and multifurcated light guides with excellent luminosty characteristics.

Light Guide Condensing Lenses Data Sheet (512KB-PDF file)